教你如何用Lab模式調暖色色調(3)
來源:
作者:
學習:883人次
來源:照片處理網 作者:那村的人兒
最終效果
![](http://pic.16xx8.com/allimg/081222/2322080.jpg)
原圖
![](http://pic.16xx8.com/allimg/081222/2322081.jpg)
1、打開素材圖片,選擇菜單:圖像 > 模式 > Lab顏色,確定后創建曲線調整圖層,參數設置如下圖
![](http://pic.16xx8.com/allimg/081222/2322083.jpg)
2、選擇菜單:圖像 > 模式 > RGB顏色,點合拼,然后把背景圖層復制一層,圖層混合模式改為“柔光”,圖層不透明度改為:35%。
3、新建一個圖層,按Ctrl + Alt + Shift + E蓋印圖層,使用Topaz濾鏡銳化一下,參數默認。
![](http://pic.16xx8.com/allimg/081222/2322085.jpg)
4、新建一個圖層,E蓋印圖層,使用第七個Topaz濾鏡銳化一下(部分沒有升級的版本就用同一個)。
5、執行:圖像 > 應用圖像,參數設置如下圖。
6、把應用圖像后的圖層復制一層,執行:圖像 > 調整 > 自動顏色操作,然后把圖層的不透明度改為:55%,完成最終效果。
最終效果
![](http://pic.16xx8.com/allimg/081222/2322080.jpg)
原圖
![](http://pic.16xx8.com/allimg/081222/2322081.jpg)
1、打開素材圖片,選擇菜單:圖像 > 模式 > Lab顏色,確定后創建曲線調整圖層,參數設置如下圖
![](http://pic.16xx8.com/allimg/081222/2322082.jpg)
![](http://pic.16xx8.com/allimg/081222/2322083.jpg)
2、選擇菜單:圖像 > 模式 > RGB顏色,點合拼,然后把背景圖層復制一層,圖層混合模式改為“柔光”,圖層不透明度改為:35%。
![](http://pic.16xx8.com/allimg/081222/2322084.jpg)
3、新建一個圖層,按Ctrl + Alt + Shift + E蓋印圖層,使用Topaz濾鏡銳化一下,參數默認。
![](http://pic.16xx8.com/allimg/081222/2322085.jpg)
4、新建一個圖層,E蓋印圖層,使用第七個Topaz濾鏡銳化一下(部分沒有升級的版本就用同一個)。
![](http://pic.16xx8.com/allimg/081222/2322086.jpg)
5、執行:圖像 > 應用圖像,參數設置如下圖。
![](http://pic.16xx8.com/allimg/081222/2322087.jpg)
6、把應用圖像后的圖層復制一層,執行:圖像 > 調整 > 自動顏色操作,然后把圖層的不透明度改為:55%,完成最終效果。
![](http://pic.16xx8.com/allimg/081222/2322088.jpg)
- 相關教程
- TA的教程
- 收藏
- 返回
- Lab調色
- 那村的人兒
學習 · 提示
相關教程
關注大神微博加入>>
網友求助,請回答!