非主流古色古香效果教程(3)
來源:
作者:
學習:395人次
來源:PS聯盟 作者: Sener
本教程較少偏色的視頻照片的調色和美化。處理的時候重點是在人物美容,把一些雜點和雜亂的東西都清除,然后在局部上色。色 調可以根據自己的喜好設置。
最終效果
![](http://pic.16xx8.com/allimg/080701/1009320.jpg)
原圖
![](http://pic.16xx8.com/allimg/080701/1009321.jpg)
1、打開原圖,按Ctrl + J把背景圖層復制一份,選擇菜單 :圖像 應用圖像,參數設置如圖1,效果如圖2。
![](http://pic.16xx8.com/allimg/080701/1009322.jpg)
圖1
![](http://pic.16xx8.com/allimg/080701/1009323.jpg)
圖2
2、按Ctrl + J把應用圖像 后的圖層復制一層,把圖層混合模式改為柔光,效果如圖3。
![](http://pic.16xx8.com/allimg/080701/1009324.jpg)
圖 3
3、新建一個圖層按Ctrl + Alt + Shift + E蓋印圖層,執行菜單:濾鏡 其它 高反差保留,參數設置如圖4,效果如圖5。
![](http://pic.16xx8.com/allimg/080701/1009325.jpg)
圖4
![](http://pic.16xx8.com/allimg/080701/1009326.jpg)
圖5
[table][/table]
4、新 建一個圖層填充顏色:#DDA557,把圖層混合模式改為正片疊底,效果如圖6。
![](http://pic.16xx8.com/allimg/080701/1009327.jpg)
圖6
5、新建一個圖層,前景顏色設置為:#097DC7把人 物臉跟頭發的接口處涂一下,如圖7,然后把圖層混合模式改為正片疊底,效果如圖8。
![](http://pic.16xx8.com/allimg/080701/1009328.jpg)
圖7
![](http://pic.16xx8.com/allimg/080701/1009329.jpg)
圖8
6、新建一個圖層,前景顏色設置為:#FB49B1,用畫 筆工具把頭發周圍及腮紅位置涂紅,然后把圖層混合模式改為疊加,效果如圖9。
![](http://pic.16xx8.com/allimg/080701/10093210.jpg)
圖9
7、新建一個圖層,蓋印圖層,執行菜單:濾鏡 模糊 高斯模 糊,數值為5,確定后把圖層混合模式改為柔光,圖層不透明度改為:40%,效果如圖10。
![](http://pic.16xx8.com/allimg/080701/10093211.jpg)
圖10
8、新建一個圖層,蓋印圖層, 選擇涂抹工具把有色的地方涂抹一下,再用減淡和加深工具適當調整下圖片的明暗度,效果如圖11。
![](http://pic.16xx8.com/allimg/080701/10093212.jpg)
圖11
9、新建一個圖層,按Ctrl + Alt + ~調出高光選區,填充顏色 :#FBEAB5,圖層不透明度改為:40%,效果如圖12。
![](http://pic.16xx8.com/allimg/080701/10093213.jpg)
圖12
10、創建曲線調整圖層,參數設置如圖13,效果如圖14。
![](http://pic.16xx8.com/allimg/080701/10093214.jpg)
圖13
![](http://pic.16xx8.com/allimg/080701/10093215.jpg)
圖14
11、創建亮度/對比度調整圖層,參數設置如圖15, 效果如圖16。
![](http://pic.16xx8.com/allimg/080701/10093216.jpg)
圖15
![](http://pic.16xx8.com/allimg/080701/10093217.jpg)
圖16
12、新建一個圖層,蓋印圖層,然后整體修飾下細節就完成了 。
本教程較少偏色的視頻照片的調色和美化。處理的時候重點是在人物美容,把一些雜點和雜亂的東西都清除,然后在局部上色。色 調可以根據自己的喜好設置。
最終效果
![](http://pic.16xx8.com/allimg/080701/1009320.jpg)
原圖
![](http://pic.16xx8.com/allimg/080701/1009321.jpg)
1、打開原圖,按Ctrl + J把背景圖層復制一份,選擇菜單 :圖像 應用圖像,參數設置如圖1,效果如圖2。
![](http://pic.16xx8.com/allimg/080701/1009322.jpg)
圖1
![](http://pic.16xx8.com/allimg/080701/1009323.jpg)
圖2
2、按Ctrl + J把應用圖像 后的圖層復制一層,把圖層混合模式改為柔光,效果如圖3。
![](http://pic.16xx8.com/allimg/080701/1009324.jpg)
圖 3
3、新建一個圖層按Ctrl + Alt + Shift + E蓋印圖層,執行菜單:濾鏡 其它 高反差保留,參數設置如圖4,效果如圖5。
![](http://pic.16xx8.com/allimg/080701/1009325.jpg)
圖4
![](http://pic.16xx8.com/allimg/080701/1009326.jpg)
圖5
[table][/table]
4、新 建一個圖層填充顏色:#DDA557,把圖層混合模式改為正片疊底,效果如圖6。
![](http://pic.16xx8.com/allimg/080701/1009327.jpg)
圖6
5、新建一個圖層,前景顏色設置為:#097DC7把人 物臉跟頭發的接口處涂一下,如圖7,然后把圖層混合模式改為正片疊底,效果如圖8。
![](http://pic.16xx8.com/allimg/080701/1009328.jpg)
圖7
![](http://pic.16xx8.com/allimg/080701/1009329.jpg)
圖8
6、新建一個圖層,前景顏色設置為:#FB49B1,用畫 筆工具把頭發周圍及腮紅位置涂紅,然后把圖層混合模式改為疊加,效果如圖9。
![](http://pic.16xx8.com/allimg/080701/10093210.jpg)
圖9
7、新建一個圖層,蓋印圖層,執行菜單:濾鏡 模糊 高斯模 糊,數值為5,確定后把圖層混合模式改為柔光,圖層不透明度改為:40%,效果如圖10。
![](http://pic.16xx8.com/allimg/080701/10093211.jpg)
圖10
8、新建一個圖層,蓋印圖層, 選擇涂抹工具把有色的地方涂抹一下,再用減淡和加深工具適當調整下圖片的明暗度,效果如圖11。
![](http://pic.16xx8.com/allimg/080701/10093212.jpg)
圖11
9、新建一個圖層,按Ctrl + Alt + ~調出高光選區,填充顏色 :#FBEAB5,圖層不透明度改為:40%,效果如圖12。
![](http://pic.16xx8.com/allimg/080701/10093213.jpg)
圖12
10、創建曲線調整圖層,參數設置如圖13,效果如圖14。
![](http://pic.16xx8.com/allimg/080701/10093214.jpg)
圖13
![](http://pic.16xx8.com/allimg/080701/10093215.jpg)
圖14
11、創建亮度/對比度調整圖層,參數設置如圖15, 效果如圖16。
![](http://pic.16xx8.com/allimg/080701/10093216.jpg)
圖15
![](http://pic.16xx8.com/allimg/080701/10093217.jpg)
圖16
12、新建一個圖層,蓋印圖層,然后整體修飾下細節就完成了 。
學習 · 提示
相關教程
關注大神微博加入>>
網友求助,請回答!